Linga POS Network Setup Guide

Download PDF file below, under Attachments section.

Ports to have open: HTTP port 80, https443, Port 9096 for sync

• Related Articles

• Network Requirements

  •        Linga requires a wired network for all our installations especially for table service locations. •        Each Linga POS device needs to have a Cat6 drop dedicated to it. •        Do not splice or use the Cat6 lines for phone or other ...

• Kitchen Display System (KDS) Setup Guide

  Download PDF file below, under Attachments section.

• Network Requirements

  Wireless/Wired Setup. Minimum internet bandwidth download speed of 15Mbps and 5Mbps upload speed require, subject to devices connected on the network. Available bandwidth is affected by local network traffic and your Internet connection. Wi-Fi with ...

• Linga POS KDS Setup Guide

  LINGA – KDS Setup: Instructions:         1. First connect the Monitor to the Bematech LS8000 device using the serial connector.       2. Connect the (Active) LAN cable to the Bematech LS8000 device.       3. With the LAN – USB connector provided by ...

• Configure CAS SCALE SW RS 10 or SW RS 20 for Linga POS

  Check Attachment