Network Setup using Bluetooth Receipt Printer

Network Setup using Bluetooth Receipt Printer

    • Related Articles

    • Network Requirements

      •        Linga requires a wired network for all our installations especially for table service locations. •        Each Linga POS device needs to have a Cat6 drop dedicated to it. •        Do not splice or use the Cat6 lines for phone or other ...
    • GiveX setup manual.

      Please find the steps to setup the GiveX in super admin page   1.Go to Super admin page 2.Enable the GiveX option 3.Enter the User Id 4.Enter password and Confirm password 5.Enter Primary URL and Secondary URL 6.Click save button   Please find the ...
    • Epson TM-M30 IP Connection

      Note:  This information is available in a Word document and PDF file at the bottom of the page.   Plug in network Cable press the paper feed button the turn the power on You will see the ! display on the screen release the feed button.  Press the ...
    • Adding a Receipt Printer

      Adding a Receipt Printer to the Back Office: Select “Settings”, “Printer Configuration”, “Receipt Printers” Select “+Receipt Printer” Type in the IP address from the ticket and press “Update”
    • EPSON TM-M30 Wireless Printer

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  How to Reset a Tm-m30 Wireless Printer to setup on a system: First turn off power to the printer Step 1: Insert a paper clip into the status sheet button ...