Setup for Bluetooth Scanner with Linga

Setup for Bluetooth Scanner with Linga



 

How to remove the PREAMBLE and UPC-A check digit from barcode using 1D imager scanner- 7Ci model



Please find the attachment. 





    • Related Articles

    • S700 Bluetooth Scanner Setup

      Connecting a BT Scanner: Turn on the Scanner by holding down the small black button until you see the green and blue lights After device is on scan this barcode. This will reset the scanner back to factory default The device will now turn off and you ...
    • S700 Scanner Setup & Retail Item Creation

      Note:  This information is available in a Word document and PDF file at the bottom of the page. Please open the file to gain access to all of the instructions.  Print this document on a good quality printer. Go into Bluetooth first and press the I ...
    • Configure CAS SCALE SW RS 10 or SW RS 20 for Linga POS

      Check Attachment
    • Linga Printer Compatibility

      • We offer full support for printers available on our shopping website. They have all been tested with Linga POS. • There are some other printers from Epson and Bixalon that may work with Linga, but we do not guarantee they will work.  o Testing: If ...
    • GiveX setup manual.

      Please find the steps to setup the GiveX in super admin page   1.Go to Super admin page 2.Enable the GiveX option 3.Enter the User Id 4.Enter password and Confirm password 5.Enter Primary URL and Secondary URL 6.Click save button   Please find the ...