Printers

Star Printers that do not support Epson Emulation on IOS.

We can NOT enable Epson emulation for IOS when using Star TSP 100 series. 
When you sell/support Linga customers with Start TSP 100 series, make sure to inform customers that they won't be able to use these printers for Linga.  

    • Related Articles

    • Star SP700

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  Perform a Self-Test: Hold down the Feed button and turn on the Printer, release your finger from the feed button (after 3 seconds) to print Self-Test ...

    • Star Printer DIP Settings

      Supported Printers and Settings o SP500 and SP700: Set DIP switch 4 OFF o TSP650, TSP650II, TSP70II, and FVP10: Set DIP switch 1-1 (On the group of 8) OFF o TSP800II: Set DIP switches 1-1 and 1-2 (On the group of 8) OFF • The DIP switches are located ...

    • Star TSP100III

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  Perform a Self-Test: Hold down the feed button and turn the printer on (wait 3 seconds) and release the feed button and a self-test will print Self-Test: ...

    • EPSON TM-U220B

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  To locate the IP Address for printer: On the back of the printer you will need to hold down the reset button (using a paper clip) until the “Dynamic ...

    • EPSON TM-M30 Wireless Printer

      Note:  This information is available in a Word document and PDF file at the bottom of the page.  How to Reset a Tm-m30 Wireless Printer to setup on a system: First turn off power to the printer Step 1: Insert a paper clip into the status sheet button ...